Here our quick front assemble led display is a very hot series goods,see below features.
1) Fast assemble,just take 8s/module for assemble and disassemble,save a lot of labor cost and time.
2) Convenient maintenance way,support front and back access.
3) Competitive price,this price is almost the same with the traditional back maintenance led billboard.
Fast Remove P10.88 SMD LED Screen and P10.88 DIP LED Screen Parameter
Pixel Pitch | 10.88mm | 10.88mm |
Pixel Density/m2 | 8,448dots | 8,448dots |
LED Configuration | 1R1G1B SMD | 1R1G1B DIP |
Module Size | 304.8mm*304.8mm | 304.8mm*304.8mm |
1ft * 1ft | 1ft * 1ft | |
Module Resolution | 28*28 dots | 28*28 dots |
Warranty | 2-3 years | 2-3 years |
Panel size (WxH) | 914mm*914mm | 914mm*914mm |
3ft * 3ft | 3ft * 3ft | |
Refresh Rate | 960-2880hz | 960-2880hz |
Driving IC | 10m | 10m |
Refresh Rate | MBI5124 | MBI5124 |
Brightness | ≥5000cd/m2 | ≥7000cd/m2 |
Viewing Angle (H/V) | 140°/140° | 110°/50° |
Lifespan | 100,000 hours | 100,000 hours |
Operating Temperature | -20℃~ +60℃ | -20℃~ +60℃ |
IP Rating | IP65 | IP65 |
Control System | Novastar/Linsn /Colorlight | Novastar/Linsn /Colorlight |
Fast Remove Module Design
Outdoor SMD P10.88 Fast Assemble LED Screen Aging Time
Factory View
FAQ-LED MODULE AND LED CABINET DISTINCTION
The module is part of the cabinet. It is often a polymer panel on which there are on one side face of the illuminating LED with their mask, on the other integrating circuit IC which will control the LEDs.
The modules are fixed on the cabinet either by screws from the back if there is a rear maintenance practice or by magnetic system when it is a front maintenance. Depending on the pitch, the number of LEDs per module varies.
