Outdoor LED Sign

Product Features
Support front and rear maintenance.
Fast assemble and dismantle,save time and labor cost.
Adaptive to different installation environment.
Special PCB design with lower current to save energy more than 30%.
Selected small tolerance wavelength led lamp ensure high uniformity.
Chat Now

Product Details

Nowadays,the led display for advertisement widely use in the world.Especially the back access outdoor led billboard. But sometimes there is no maintenance space behind the led display, we can consider front maintenance,our fast lock front service led module is meet this application.


See features as below:

1)  fast assemble and disassemble

-Save labor cost. only with a tool to turn on and turn off the two locks ,plug the module to cabinet ,save time to assemble module compare traditional 8 pcs or more screws.

2)  convenient maintenance

--Support front and back maintenance.And this front access just have two screws,very fast to take off the led module.

3) competitive price

-This price is just a little high compared to the traditional front service led module.


Outdoor P7.62 SMD Front Access LED Display


Outdoor Front remove 1ft*1ft led module 3ft*3ft cabinet LED display

Pixel Pitch

5.44mm

6.35mm

7.62mm

Pixel Density/m2

33,791dots

24,800 dots

17,222dots

LED Configuration 

1R1G1B SMD

1R1G1B SMD

1R1G1B SMD

Module Size

304.8mm*304.8mm

304.8mm*304.8mm

304.8mm*304.8mm

1ft * 1ft

1ft * 1ft

1ft * 1ft

Module Resolution

56*56 dots

48*48 dots

40*40 dots

LED

Multi Color

Multi Color

Multi Color

Panel size (WxH)

914mm*914mm

914mm*914mm

914mm*914mm

3ft * 3ft

3ft * 3ft

3ft * 3ft

Minimum Viewing Distance

5m

6m

7m

Driving IC

MBI5124

MBI5124

MBI5124

Refresh Rate

≥ 2880 Hz

≥ 2880 Hz

≥ 2880 Hz

Brightness

 ≥7000cd/m2

 ≥6500cd/m2

≥6000cd/m2

Viewing Angle (H/V)

140°/140°

140°/140°

140°/140°

Lifespan

100,000 hours

100,000 hours

100,000 hours

Operating Temperature

-20℃~ +60℃

-20℃~ +60℃

-20℃~ +60℃

IP Rating

IP65

IP65

IP65

Control System

Novastar/Linsn 
/Colorlight

Novastar/Linsn 
/Colorlight

Novastar/Linsn 
/Colorlight

Warranty

2 years

2 years

2 years


Fast Remove From Front

图片187(001)

Front Access LED Display Screen Aging Time

图片188

Front Service Way

图片189

LED Cabinet

图片190(001)

Strategic partnership

We ensure you make money.

We don’t sell your market.

We do good product,you do market.

Resolution + Reliability + Reasonable Cost = Revenue


FAQ-Types of LED DISPLAY

There are two types of LED panels: conventional (using discrete LEDs) and surface-mounted device (SMD) panels. Most outdoor screens and some indoor screens are built around discrete LEDs, also known as individually mounted LEDs. A cluster of red, green, and blue diodes is driven together to form a full-colour pixel, usually square in shape. These pixels are spaced evenly apart and are measured from centre to centre to give the measurement known as pixel pitch.

Most indoor screens on the market are built using SMD technology, a trend that is now extending to the outdoor market. An SMD pixel consists of red, green, and blue diodes mounted on a chipset, which is then mounted on the driver PC board. The individual diodes are smaller than a pinhead and are set very close together. The main drawback in SMD screens for outdoor use is that the maximum viewing distance is reduced by 25% from the discrete diode screen with the same resolution.


Hot Tags: Outdoor LED Sign, China, manufacturers, suppliers, factory

Inquiry

You Might Also Like