Four Elements of LED Display in Studio

- Apr 23, 2020-

LED screens are more and more popular in TV studios. However, the effect of TV screens varies greatly during the use of LED screens. Some of the screens are bright and clear from the beginning to the end; some are small and indistinct when viewed from a distance Attention should be paid to several issues in the selection and use of LED screens.

The shooting distance should be appropriate

As mentioned before about the dot pitch and fill factor, the appropriate shooting distance for LED screens with different dot pitch and different fill factors is different. Taking an LED display with a dot pitch of 4.25 mm and a fill factor of 60% as an example, the distance between the person being photographed and the screen is more appropriate at 4-10 meters, so that when shooting people, you can get a better background picture. If the person is too close to the screen, when shooting a close-up, the background will appear grainy, and it is also easy to produce moire.

Point spacing should be as small as possible

The dot pitch is the distance between the center points of adjacent pixels of the LED screen. The smaller the dot pitch, the more pixels per unit area, the higher the resolution, the closer the shooting distance can be, of course, the more expensive the price. At present, the dot pitch of LED screens used in the studios of domestic TV stations is mostly 6-8 mm. It is necessary to carefully study the relationship between the resolution of the signal source and the dot pitch, and strive to achieve consistent resolution and achieve point-to-point display to achieve the Good effect.

The color temperature should be adjusted

When the studio uses the LED screen as the background, its color temperature should be consistent with the color temperature of the lights in the studio to obtain accurate color reproduction in the shooting. According to the needs of the program, the lighting of the studio sometimes uses 3200K low color temperature fixtures, sometimes uses 5600K high color temperature lamps, and the LED display needs to be adjusted to the corresponding color temperature to obtain satisfactory shooting results.

Ensure a good environment

The life and stability of the LED screen are closely related to the operating temperature. If the actual operating temperature exceeds the specified usage range of the product, not only its life will be shortened, but the product itself will also be severely damaged. In addition, the threat of dust cannot be ignored. Too much dust will reduce the thermal stability of the LED screen or even cause electrical leakage. In severe cases, it will cause burnout; dust will also absorb moisture, which will corrode electronic circuits and cause some short-circuit problems that are not easy to troubleshoot.

The LED screen has no stitching, which can make the picture more perfect; lower power consumption, less heat, energy saving and environmental protection; it has good consistency, which can ensure the indiscriminate display of the picture; the cabinet size is small, which is convenient for the background screen to form a smooth shape Color gamut coverage is higher than other display products; it has the advantage of better weak reflective characteristics, and has high operational reliability and low operation and maintenance costs in the future.

Of course, LED screens with so many advantages must also be used well in order to make its advantages manifest to the fullest. Therefore, to use LED screens in TV programs, we have to choose the appropriate LED screens and understand their characteristics in depth. Studio conditions, program formats and requirements select technical products as the background, allowing these new technologies to maximize their advantages.