How does led display cope with the humid environment

- Jun 20, 2019-

Recently, parts of the south is still rainy, feel in the air can squeeze out water, if the long - term retention of water vapor on the circuit board, it is easy to cause mold circuit board, leading to performance failure! Therefore, in order to ensure that LED displays can shine brightly in wet weather, we must do a good job of spring moisture-proof work.


With just a few steps, the display can easily cope with humidity


1. Choose a good screen


The first step of LED display damp proof is to ensure that the display screen has the function of damp proof. In this aspect, let's see how the product is well moistened.


First of all, all incoming materials of the display screen are packed in vacuum, moisture-proof CARDS and desiccant are placed to ensure the stable quality of raw materials, and the storage humidity is controlled at the appropriate 30%-60%RH.


2. Scientific storage


For dealers, there are two points to pay attention to:


1. The storage shall be placed in a dry and ventilated place (it is recommended to place the second floor or above the second floor) and padded with pallet or other objects. The products shall not be in direct contact with the ground.


2. After the display box is unpacked, desiccant shall be placed on the whole box. Tape shall be used to seal the box, and it shall not be directly exposed to air.


3. Light and damp proof


End users need to ensure that the LED display should be lit at least 2-3 times per week, at least half an hour each time. When switching on and off the LED display, attention should be paid to: first turn on, then turn on, then turn off, and then turn off.