What are the main performances of the four major indicators of LED display?

- Jul 01, 2019-

Since 1998, the LED display industry has begun to work hard to organize the establishment of LED display industry standards, in order to correctly guide users to understand the performance indicators of led display, regulate the LED display market has very important significance. The following are the four major indicators of the led display.

  1, Maximum brightness

    No clear characteristic requirements are given for the important performance of "maximum brightness". Because the environment of the LED display is very different, the illumination (which is what the average person calls the ambient brightness) is different. Therefore, for most complex products, the supplier provides a performance data as long as the corresponding test method is specified in the standard. The (Product Information) list is better than the specific performance requirements given in the standard. These are in line with international standards, but this also results in unrealistic comparisons in bidding, users do not understand this, so that the "maximum brightness" required in many tenders is often much higher than the actual needs. Therefore, it is recommended that in order to guide users to correctly understand the performance of the "maximum brightness" of the LED display, it is necessary for the industry to give a guide: in some occasions, under the different illumination environment, what is the brightness of the led display? Can meet the requirements.

    2. Primary color dominant wavelength error

    Changing the primary wavelength error index of the primary color from the "primary color wavelength error" to the "primary primary wavelength error" is more indicative of what this indicator reflects in the LED display. The dominant wavelength of color is equivalent to the hue of the color observed by the human eye. It is a psychological quantity and an attribute that distinguishes colors from each other. And the performance requirements stipulated by this industry standard, literally, users can not understand that it is an indicator reflecting the color uniformity of the led display. Therefore, is it to guide the user to understand the term first, and then understand this indicator? Or first understand and understand the LED display from the customer's point of view, and then give users the easy-to-understand performance characteristics that can be understood?

    One of the principles of product standard setting is the “performance principle”: “Whenever possible, the requirements should be expressed by performance characteristics, without design and description of the characteristics, this method leaves the greatest room for technological development.” The wavelength error is such a design requirement. If it is replaced by "color uniformity", there is no LED that defines the wavelength. For the user, as long as you ensure that the color of the led display is uniform, you do not have to consider that you are using What technical means to achieve, to leave as much room for technological development, which is greatly beneficial to the development of the industry.

    3. Duty cycle

    As mentioned above, "performance principle" "As long as possible, the requirements should be expressed by performance characteristics, without design and description of the characteristics, this method leaves the greatest room for technological development." We believe that "duty" "Beyond the requirements of a design technology, it should not be used as a performance indicator of the LED display product standard; everyone understands that there is a user who cares about the display duty cycle of the display, they care about the effect of the display. Instead of our technology implementation; why should we create such technical barriers ourselves and limit the technological development of the industry?

    4. Refresh frequency

    From the point of view of measurement methods, it seems to ignore the problems that users really care about. It also does not take into account the different driver ICs, drive circuits and methods used by various manufacturers, which makes the test difficult. For example, the full color screen bidding of the Shenzhen Stadium, in the expert sample test, the test of this indicator brings many problems. The “refresh frequency” frame shows the reciprocal of the required time, and the display screen is used as a light source, which is the blinking frequency of the light source. We can directly test the flashing frequency of the light source of the display with an instrument similar to the “light-sensing frequency meter” to reflect this indicator. We have done this test using an oscilloscope to measure the LED drive current waveform of any color to determine the "refresh frequency", measured 200Hz in the white field; in the low gray level such as 3 gray scale, the measured frequency is up to More than ten k Hz, and measured with PR-650 spectrometer; whether in the white field, or in the gray level of 200, 100, 50, the measured source flicker frequency is 200 Hz.

    The above points are only a simple description of the characteristics of several led display screens, as well as the "working life", "average time between failures" encountered in many bidding, etc., no test method can be shorter It is confirmed in time that the led display meets the requirements of stability, reliability or longevity; these requirements should not be specified. The producer can make a guarantee, but it cannot replace the requirement. It is a business concept, a contract concept, not a technical concept. The industry should have a clear statement about this, which will be very beneficial to users, producers and the entire industry.

    For how to guide users to correctly understand the product of a complex system such as led display, it is necessary for industry associations to engage in more LED display technology forums. It is more practical to analyze this product from the user's point of view and guide users to correctly understand the LED display. .